Polished concrete floors are becoming very popular in residential and commercial construction nowadays. These floors are shiny, pleasing to the eye, and can be used for many different applications. Polished concrete has a polished look similar to that of marble, granite, or stone. They are relatively easy to work with since there are no acids involved.
Los Angeles Concrete Pro offers several design options for flooring. The polished concrete will have several design options available to create different effects through the use of various-colored marbles and other substances as additives to the grinding and sealing process. Different colors and shades of the marbles can create radial lines, patterned areas, and other unique design options.
The first step in the process of polishing is to apply a sealant. This will protect the floor against any liquids that could ruin the finish. Once this is applied properly, it should take about two hours or so. Each marble will take a little time to grind and seal, but once all of them are finished, you will not have to worry about them for a while. There is no need to apply a clear coat over the polished concrete once the process has been completed.
After the floor has been sealed and printed, it will need to be dyed. Typically, one of two things will happen during the dyeing process. If the original color is not exactly what was expected, a new color will be created. This is usually accomplished by adding a little extra of the coloring agent into the final polishing process. However, if a customer wants a specific shade of a particular color, the company may use a special dye that will be effective at creating the shade.
After the flooring materials have been dyed, they will need to dry. For best results, the polished concrete floors should be left in their setting for the maximum amount of time possible. Any drying time should always be kept at less than 24 hours so that the materials do not dry unevenly. The gravels and aggregates should also be cleaned to make sure that there are no dirt particles and organic materials that have been attached to the polished concrete during the dyeing process.
Polished floors should always be protected from being wet. This can be done with a variety of methods, including applying a protective sealant and treating the floors before they are used. A radiant floor heating system can also be used to protect the floors after they have been stained. The system uses water vapor to heat the floor through the stone surface. A collection tray collects the warm water and it is then released to the driveway or other areas where vehicles are parked. This method allows cars to be parked on the polished concrete during the day and not get stuck on the cold surface during the night.
When looking to install polished concrete, you will also need to select a bonding agent. Typically, the two most popular choices are epoxy and urethane. While both types of finishes have their advantages, most contractors and flooring experts prefer urethane due to its increased durability and ease of maintenance. If you decide to use urethane, you should follow the manufacturer’s instructions to ensure that the finish does not become too thick.
In order for your newly stained or polished concrete to properly bond to the surface, a sealant is recommended. This sealant will help to keep the concrete surface dry and prevent it from becoming stained again. You should use a good quality sealant designed specifically for the purpose of sealing concrete. By taking your time to choose the right sealant, you can ensure that your newly stained or polished concrete surfaces will last a lifetime.